ELIMINATE ROTTEN SHED FLOORS

  • Easy to fit
  • Protect base from water damage
  • Extend the life of your new shed
  • Fits any garden wooden buildings
  • Eco Friendly made from recycled plastic
SHOP

The SHED BOOT is a revolutionary and robust new system that protects your shed floor timber bearers from moisture by keeping them properly ventilated

It has been innovatively designed to be easily fitted onto the base during installation of your new shed build AND is a small price to pay to drastically increase the life span of your shed floor.

Protecting your shed base from water damage could not be easier… put a BOOT on it!

Easy to fit

The SHED BOOT has been innovatively designed to be easily fitted to the battens on the base of your shed at the installation stage. Space 300mm apart and use the wings to clip onto the timber bearers to hold the SHED BOOT in place ready for nailing, you can snap off the wings for larger battens and/or the corner areas. If heavy weight is to be placed on the floor, reduce the gap but you will need more boots.

Click here to view the Installation Guide.

Click here to view a short video to demonstrate.

Eliminate rotten shed floors

Designed, developed and manufactured by our specialist plastic injection technicians, the strong SHED BOOT elevates your wooden shed base off the hard ground by 20mm, allowing rainwater to escape and ensuring your timbers are properly ventilated to prevent damp and rot.

Extend the life of your new shed

The SHED BOOT is a robust new base solution that is quick and easy to fit. Raising your garden shed off the ground keeps your timbers dry and protects the floor from moisture and water damage by letting air circulate underneath, therefore preserving your shed and prolonging the life span of your garden building.

Eco Friendly made from recycled plastic

The SHED BOOT is made in the UK from 100% recycled and reprocessed, durable Polypropylene (PP), which does not compromise on quality of the product.

Instead of going IN the ground, it’s ON the ground…supporting and saving your shed!

Best Sellers

Don't see your shed size?

The SHED BOOT is £7 per pack of 10 - you need one per ft (300mm) so a shed measuring 8ft x 6ft will need 8×6 individual shed boots = 48 (5 packs of 10).

If you can’t see your shed size above then use our handy calculator to work out how many you need.

Shed Boot Calculator

ECO FRIENDLY - The SHED BOOT is made in the UK from 100% recycled and reprocessed Polypropylene (PP), which does not compromise quality of the product.

Instead of going IN the ground, it’s ON the ground… supporting and saving your shed!

“Polypropylene (PP) is a strong, high performing thermoplastic that’s widely used in multiple industries, as it's one of the most common, versatile polymers.” - MBA Polymers UK.

Learn more

DID YOU KNOW… The SHED BOOT can also be used with other garden buildings?

The SHED BOOT is a unique, versatile base solution which was primarily designed to protect shed floors from rotting...But why stop there? It can be used on ANY garden wooden buildings!

If you’re thinking of buying a new wooden garden construction, such as:

• Garden Rooms • Summerhouses • Home Offices • Playhouse • Bike Shed • Potting Shed • Dog Kennel • Rabbit/Guinea Pig Hutch • Log Store

Think about elevating and protecting the timber floor from water damage…think the SHED BOOT!

HOW TO INSTALL

The finished result

HOW MANY DO I NEED?

The SHED BOOT comes in packs of 10.

A shed measuring 8ft x 6ft will need 8×6 individual shed boots = 48 (5 packs of 10).

Need a shipping quote for outside the UK or want to be a distributor? Contact us at: production@cybertoolsltd.co.uk

BUY NOW

Q&A

How quick is delivery?

Place your order by 1pm -- from Monday to Friday -- for FedEx Next Day delivery service.

Collection from Cybertools is available between Monday–Friday from 9am–5pm.

How do I attach the SHED BOOT?

It’s as Easy as ABC!... Space the SHED BOOT 300mm apart and use the wings to clip onto the batten to hold in place ready for nailing, you can snap off the wings for larger battens and/or the corner areas. If heavy weight is to be placed on the floor, reduce the gap but you will need more boots. If you don’t believe us, watch this video to demonstrate!

Which size nails do I need?

We recommend using 1.5mm diameter nails and 10/15mm in length.

What surface can the SHED BOOT be used on?

The SHED BOOT must only be used on a hard and firm surface, not on an uneven or soft ground.

Can the SHED BOOT be reused?

Yes, the SHED BOOT is made from durable and 100% recycled Polypropylene (PP) which can be used for many years.

Origin of the Product

When it came to renewing his old shed which was suffering from floor and lower wall rot, Roy Brown, an experienced toolmaker and mould tool designer, developed an idea to stop his new shed from suffering the same demise.

Roy invented and designed a plastic moulding that would be attached to the underside of the shed floor, pitched evenly out across the bearers before starting assembly. Ingenious yet simple, easy to fit mouldings which will not allow water to permeate through them and so in turn keeps the porous floor bearers dry. The added bonus of his design is that by raising the shed floor up from its hard standing, it allows the wooden floor to breath as air can pass underneath.

The PRODUCT NAME emerged by Roy thinking of the product's purpose i.e. it fits to the bottom of a SHED, it creates a barrier to the ground and keeps it dry – just as a BOOT works.

Thus, the birth of the SHED BOOT!

Roy approached his son, Paul Brown, who owns CYBERTOOLS LTD, a toolmaking and plastic injection specialist moulding company, who made the mould tool and manufactures the durable, 100% recycled and reprocessed polyproylene (PP) product.

There's no better person to explain the installation of the SHED BOOT than Roy himself, so keep scroll back up to watch his informative video!

BLOG

View all
1 3
View all